When people are designing lightweight products, or repairing a worn-out thread, a dependable fastening tool can make a big difference. This is where self tapping threaded inserts can come into play. These inserts eliminate the need for pre-tapping and reduce installation time, as they are engineered to cut their own threads.
They help reinforce assemblies, improve durability, and allow for repeated disassembly without degrading the holding strength, by forming secure internal threads in softer or brittle materials. They are used in literally everything, from industrial equipment, to automobiles, electronic housing and anything in between
In this article, we will talk about what self tapping inserts are, what are some of their common types and applications, and share some installation tips with them.
What are self-tapping threaded inserts?
Self‑tapping threaded inserts are just like any normal metal bushing, only that they are engineered to have both internal and external threads. These are specially engineered to cut their own mating threads as they’re driven into pre‑drilled holes. People don’t need to tap the hole in advance, making installation much quicker and cleaner.
They are traditionally made using metals like brass, stainless steel, carbon steel, and zinc-plated steel, based on their intended use. The material chosen depends on the required corrosion resistance, strength and wearability.
As they are turned in, they offer a durable, vibration-resistant threaded joint that holds up even during repeated assembly and disassembly. As the inserts are ‘self-tapping’, so they form their own thread, making the installation process much simpler. All people need is just drill the right size hole, align the insert, and drive it in with a suitable tool.
The most popular types of self-tapping threaded inserts
Self-tapping threaded inserts come in a few common styles, based on the material and application:
L3020 Series Slotted self tapping thread insert
L3020/L3022 series inserts are the most widely used one among all of the threaded self-tapping inserts. Its two slots function as the cutting edge and slightly renders an inward screw locking performance.
L3070 Series Self tapping thread insert with hole pattern
L3070/L3072/L3080/L3082 series are used in difficult-cutting materials three cutting holes perform the self-tapping action.
Self tapping thread insert for wood
Internal and external tooth design, adding three grooves and guide sections for easy cutting.
Common applications
Self tapping threaded inserts are nearly everywhere. From transportation to electronics, they are a must when people need strong, durable threads in materials that are too soft or thin to hold screws cleanly.
Automotive
These inserts are widely used in the automotive sector, making up around 35% of insert usage. They reinforce threads in lightweight materials like aluminum or plastic, while withstanding vibration and stress.
Electronics and appliances
Threaded inserts are ideal for plastics used in enclosure housings, control panels, or circuit board mounts. These inserts ensure secure, reusable threads without cracking delicate parts.
Furniture and woodwork
Common in flat‑pack furniture, threaded inserts are a reliable option where traditional screws might otherwise wade through weak surfaces. Woodworkers also use them when repeated disassembly is needed, like in knock‑down desks, modular cabinets, and fixtures.
Industrial machinery
Mostly used in general manufacturing, these inserts help repair stripped threads or add durable fastener points in sheet metal, aluminum, composites, and technical foams. They're especially common in assemblies where components may need to be serviced or replaced later on.
Wherever people need to build things from scratch or restore strong, reusable threads, threaded inserts are a go-to solution. Although, they come with a slightly higher upfront cost, but they are worth every penny.
Installation tips
Self‑tapping threaded inserts are not tricky to install. Just follow these simple, fact‑based tips to get it right every time:
Measure hole size and depth carefully
Use the manufacturer’s recommended hole diameter, typically slightly smaller than the insert’s outer threads, to allow proper engagement. For blind holes, drill to about 1.2× the insert length so it seats fully without bottoming out.
Ensure cleanliness and alignment
Clean out any dust, chips, or debris before insertion. A clean hole helps the insert cut correctly and engage fully. Keep the insert perfectly perpendicular to the surface to avoid misalignment or stripping.
Use proper tools and lubrication
If possible, use a dedicated installation driver (or a bolt plus jam nut method) to keep things straight. A light coat of PTFE lubricant or wax on the insert can reduce friction, improve alignment, and sometimes speed up installation by ~20%.
Insert steadily and monitor torque
Apply even pressure as people turn the insert into the hole. Stop just short of flush, then verify it’s level, and finish seating it gently. Avoid overtightening (especially with brass inserts) as it can damage threads or split the material.
Check final seating and test fit
Once seated, the insert should be flush or just slightly below the surface. In wood or plastic, a light tap with a mallet can help. After installation, insert a bolt to test for smooth threading and secure engagement.
By keeping a precise hole size, perfect alignment and controlling the pressure, they’ll get clean, strong, and reliable installs every time.
Can threaded inserts be reused?
While in most cases, self tapping threaded inserts are good for one-time use only, in some cases, people can also reuse them. Some types, like metal helical inserts, can be removed and installed again.
Before considering the reuse, assess the inserts and surrounding material thoroughly and if people notice any wear, then do not reuse.
Conclusion
Self-tapping threaded inserts are engineered to provide a blend of strength, efficiency, and versatility. This is what makes them a smart choice across various industries.
If people are looking for reliable and self tapping threaded inserts, then must check out the amazing collection from In-Sail. We have mastered the high quality fastening systems, automation tools, electronic components and other machining tools since 1982.
Media Contact
Company Name: In-saiL
Email: Send Email
Country: China
Website: https://www.ppmcn.com/